Ref: TA HH905D

TAMA - HH905D

Ref: TA HH905D

TAMA - HH905D

Iron Cobra 900 Lever Glide Hi-Hat Stand HH905DThe perfect counterpart to Iron Cobra 900 Series bass drum pedals, the Iron Cobra 900 Series hi-hat stands offer incredibly sensitive, lightning-fast action, maximum adjustability and completely noise-free operation. The latest innovation on these stands, the new "Quick-Set Clutch", allows hi-hat cymbals to..." Leia mais

SOB CONSULTA

286,00

Menos
Mais
ADICIONAR

Iron Cobra 900 Lever Glide Hi-Hat Stand HH905D

The perfect counterpart to Iron Cobra 900 Series bass drum pedals, the Iron Cobra 900 Series hi-hat stands offer incredibly sensitive, lightning-fast action, maximum adjustability and completely noise-free operation. The latest innovation on these stands, the new "Quick-Set Clutch", allows hi-hat cymbals to be quickly attached and removed. The Hinge Guard Block on the footboard holds the bearing more evenly, minimizing stress and maximizing smoothness

 

Features

src=https://www.tama.com/eu/products/detail/news_file/file/feat_Cobra_Hat_Non_Loosening_Rod.jpg

Non-Loosening Tension Rod

Specially shaped plastic and metal nuts fit together perfectly to keep the cymbal rod from loosening while playing.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HH905D_LeverGlide.jpg

Lever Glide

The idea of replacing the traditional pull mehanism with a lever design was a genuinely revolutionary concept. Our Iron Cobra version uses roller bearings at the lever fulcrum for even smoother footboard action while a super-strong Kevlar® strap connects the footboard and pull rod for even, noise-free action. (Kevlar® is a registered trademark of the Dupont Corporation)

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HP900PN_Hinge_Guard_Block.jpg

Hinge Guard Block

We've changed the construction of the Bearing Hinge on the footplate from a one-piece assembly to two pieces, which holds the bearing more evenly?minimizing stress, and maximizing smoothness, while adding to the pedal's sense of power.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HH905_6way_Tension-Adjust.jpg

6-Way Tension Adjustment

Six different levels of tension can be achieved quickly by using the six easily visible settings.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HH905_Duo_Spike.jpg

Duo-Spike

It's called a stand because it's not supposed to "walk"-and our Duo-Spike makes sure your Iron Cobra hi-hat stands in one place. You can easily switch from rubber to metal by using a standard drum key.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_Swivel_Foot_HH905D.jpg

Swivel Foot

Since the foot pedal can be rotated around the dual leg base, the Swivel Foot feature greatly expands floor space and set-up flexibility.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HH905_Tilt_System.jpg

Tilt System

Not only do Tilt equipped stands offer more flexible set-ups, they also offer more expressive hi-hat work because you can tilt the hi-hat cymbal. Iron Cobra hi-hat stands can be tilted quickly and easily by loosening just one T-Bolt.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HH905_Dual_Leg.jpg

Dual Legs

Our two-leg design is not only easier to set up in limited spaces, it's actually more secure than the standard three-leg design. The secret is in the small stabilizer under the footboard which effectively shifts the balance and strength of the stand toward the player. Since there's no steel plate under the footboard, Iron Cobra hi-hats are foldable for quick set-up, fast tear down, and easy portability.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HH905_HH805_Footboard_Angle_Adjustment.jpg

Footboard Angle Adjustment

Like Iron Cobra pedals, footboard angles on Iron Cobra hi-hats can be adjusted. You can perfectly match the angle between the hi-hat footboard and the slave-side footboard of your double pedal.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_HH905_Spare_The_Rod.jpg

Spare-The-Rods Tension Rod Protector

No more tension rods getting bent out of shape during transport! With Spare-The-Rod, you can save your tension rod the rigors of the road by packing it in the specially designed upper section pipe. It's a small, but very significant TAMA hardware innovation. 

1.Insert the tension rod into the upper tube.

2.Hold the tension rod in place with the hi-hat clutch. 

3.Done. The upper tube covers the tension rod.

src=https://www.tama.com/eu/products/detail/news_file/file/feat_Glide-Tite_Grip_Joint.gif

Glide-Tite Grip Joint (US.PAT.NO.9631656)

Our new Glide-Tite Grip Joint allows for a more secure attachment by using a metal-to-metal contact point. This provides an extremely solid anchor and complete isolation for a tom or cymbal. Because the stand does not move with the instrument, the natural resonance of that instrument is maximized.

SPEC

Details

  • Quick-Set Hi-Hat Clutch
  • Spring Seat
  • 6-way Tension Adjustment
  • Oiles® Bearing Hinge
  • Spare-The-Rods Tension Rod Protector
  • Non-Loosening Tension Rod
  • Glide-Tite Grip Joint
  • Bigger Rubber Feet w/Duo-Spike
  • Long Footboard
  • Tilt System
  • Additional Short Rod Included
  • Weight: 5.2kg (11.7lbs)
  • Height Adjustment Range: 745mm-960mm (29 3/8" - 37 3/4") (Standard Rod) / 745mm-810mm (29 3/8" - 31 7/8") (Short Rod)

 

De momento não existe informação disponível

Comentários

Avaliações


TAMA - HH905D

Produto sem avaliação

Seja o primeiro a comentar

Produtos relacionados

Experiencie
Experiencie

Salas de experimentação disponíveis na loja

Levante na loja
Levante na loja

Compre online e levante a sua encomenda na loja

Apoio ao cliente
Apoio ao cliente

(+351) 214 175 549

(Chamada para rede fixa nacional)