PG58 and CVL microphone dual systems for spoken word applications with analogue wireless transmission

MAIN FEATURES

• Available Transmitter Form factors: Bodypack, Handheld
• Operating range (up to): 100 m (Under typical conditions)

BLX88 Dual Wireless Receiver for BLX Wireless System

• Up to 12 compatible systems (region dependent)
• Microprocessor-controlled internal antenna diversity
• One touch QuickScan locates the best open Frequency
• ¼" and XLR audio outputs
• Two color audio status indicator LED
  • Green: Normal audio levels
  • Red: Excessive audio levels (overload/clipping)

BLX1 Wireless Bodypack Transmitter

• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries (included) provide up to 14 hours of continuous use
• 100 m (300 ft.) operating range (line of sight)

BLX2/PG58 Handheld Transmitter with PG58 Capsule

• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries (included) provide up to 14 hours of continuous use
• 100 m (300 ft) operating range (line of sight)
• Integrated microphone capsule design
• 10 dB gain attenuation
• Lightweight, rugged construction
• Color ID caps (available separately)

Centraverse Lavalier Condenser Microphone

• Miniature clip-on lavalier microphone for low visibility
• Permanently charged electret condenser element for clear vocal reproduction
• Unidirectional (cardioid) polar pattern rejects unwanted noise for improved sound quality
• Included tie clip allows for hands-free use, perfect for presenters
• Included windscreen reduces plosives, wind and breath sounds
• Tailored frequency response optimized for speaking and presentations
• TA4F (TQG) connector seamlessly integrates with Shure wireless bodypack systems
• Legendary Shure precision engineering for durability and performance

TECHNICAL SPECIFICATIONS

BLX1288/CVL Specifications

• Set Type: Lavalier/Handheld Combo
• Amount of Bodypacks: 1
• Amount of Handhelds: 1
• Amount of TQG Mics: 1
• Included Case / Pouch: None

BLX88 Specifications

• Weight: 429 g
• Height x Width x Depth: 40.0 × 388.0 × 116.0 mm
• Transmission: Analog
• Type of Power Supply: External
• Receiver Housings: Molded ABS
• Active Antenna Possible: No
• Bias via BNC: No
• Encryption: No
• High Density Mode: No
• Interference Detection: No
• Remote Control: No
• Number of compatible systems info: 12
• DANTE-Enabled Products: No
• Scan Features: Quick Scan
• Sync Features: None
• Detachable Antennas: No
• Network ability: No
• Software control : No
• Logic: No
• Cascade: No
• Rack Hardware: Optional: Urt2
• Receiver Displays: LEDs
• Receiver type: Dual
• Line Mic Switch: No
• Image Rejection: 50 dB, typical
• RF Sensitivity: -105 dBm, for 12dB SINAD, typical
• Phantom Power Protection: Yes

BLX1 Specifications

• Weight: 75 g
• Height x Width x Depth: 110.0 × 64.0 × 21.0 mm
• Battery life lithium: 0 h
• Battery life alkaline: 14 h
• Form Factor: Bodypack
• Transmitter housings: Molded ABS
• Audio Mute: No
• Detachable Antennas: No
• Switchable RF power: No
• Batteries: AA
• Battery Status: Multi-Color LED
• Connectors: TQG
• Frequency Diversity: No
• Functionality: Transmitter
• Gain adjustment range: 26 dB
• High Density Mode: No
• Included antenna: 1/4 wave
• Input impedance: 1000 kΩ
• Transmission: Analog

BLX2/PG58 Specifications

• Weight: 340 g
• Height x Width x Depth: 224.0 × 53.0 × 53.0 mm
• Transmitter weight: 218 g
• Battery life lithium: 0 h
• Battery life alkaline: 14 h
• Form Factor: Handheld
• Transmitter housings: Molded ABS
• Audio Mute: No
• Detachable Antennas: No
• Switchable RF power: No
• Batteries: AA
• Battery Status: Multi-Color LED
• Frequency Diversity: No
• Functionality: Transmitter
• High Density Mode: No
• Transmission: Analog

CVL Specifications

• Weight: 25 g
• Frequency Response: 60 Hz – 12 kHz
• Frequency Response: Tailored
• Sensitivity: -43.50 dBV/Pa – 6.60 mV/Pa
• Equivalent Selfnoise: 22 dB(A)
• Sound Pressure: 139 dB
• Transducer Type: Condenser
• Polar Pattern: Cardioid
• Switchable low cut: No
• Connectors: TQG (T4AF, 4-Pin Mini)
• Attenuator: No
• Interchangeable Capsule: No
• Main Functionality: Installed
• Headphone Output: No
• Requires Phantom Power: +5v DC, 10v Max VDC